Appliance Sourcing for Interior Projects: A Guide

· 7 min read

Lock Dimensions, Cutouts and Access Before You Order

The costliest mistake in appliance sourcing for interior projects is a sequencing one. MLD's guide for builders and designers puts it bluntly: appliance selection has to happen before cabinetry is ordered, and placing appliance orders before cabinet cutouts are finalized is a leading cause of costly delays and substitutions. The appliance is a fixed object with fixed demands. The cabinet maker builds around it, never the reverse.

Before any order goes out, gather three sets of numbers for every appliance on the schedule. First, the cutout and installation dimensions. Get these from your cabinet maker and the appliance specification sheet, and read them side by side. Second, the rough-in requirements: gas, electrical and drain positions. Laura Burton Interiors points out that appliance drains must be accommodated in slab preparation, so a dishwasher or washing machine decision can reach all the way back to the construction stage. Third, the delivery route. It's easy to confirm that a fridge fits its niche and forget that it also has to get through the front door and the hallway.

That last point is where many schedules quietly fail. Record access notes next to the product itself: door widths, stair turns, lift sizes, whether the unit ships crated. A measurement that lives in an email thread will get missed.

In ArchiBoard, the Web Clipper pulls the photo, price and SKU from a supplier page straight into the project, so each appliance row starts with the supplier's own data. You then add your confirmed cutout size and access notes to the same row. When the cabinet maker asks for a final spec, the answer sits in one place, not three folders. For appliances you haven't chosen yet, the shared interior product catalog lists brands, prices and dimensions pulled from real supplier sites, which makes a handy first-pass reference when you're checking whether a candidate unit will physically fit.

Specify Ventilation and Related Trade Items Together

An appliance is rarely a standalone purchase. MLD's advice is direct: don't specify an appliance without specifying its ventilation. A range needs a hood with the right clearances, a hob needs extraction that suits the ducting route, and an integrated cooling unit needs the airflow its housing allows. The hood isn't an accessory you pick at the end. Its dimensions and the clearance above the cooking surface feed straight back into the cabinet layout.

The same logic covers the trade items around the appliance. A dishwasher or washing machine brings plumbing with it, and a wet-area appliance interacts with the fittings you specify for the room. If you're sourcing the sink, tap and drainage components separately, keep them in the same room section as the appliances so nothing falls between suppliers. Browsing the plumbing catalog alongside the appliance list helps you confirm that connection types and fittings match what the unit actually requires. Electrical demands deserve the same care: a high-draw oven or induction hob may need a dedicated circuit, and the electrical fittings and cables and boards categories are the natural place to check that supporting items are specified and priced.

The method is simple. For each appliance, list its dependents: ventilation, plumbing connection, electrical supply, trim or installation kit. Group them under the room so the estimate shows the true cost of making that appliance work, not just the cost of the box. A per-room breakdown also heads off the familiar surprise where the appliance line looks fine but the surrounding trade items were never priced. When the client sees a room total, it should already include everything needed to switch the appliance on.

Compare Energy Ratings, Brand Families and Trade Pricing

Once fit and dependencies are settled, compare the shortlist on three criteria.

Energy ratings. Efficiency belongs in the specification, not in an afterthought. Cornell's ecotecture guidance advises checking energy efficiency ratings and estimated annual operating costs before buying any electrical equipment or appliances. Make that a standing line in your schedule: record the rating next to each appliance so you can compare like with like, and so you have an answer ready for the client who asks what the unit will cost to run.

Brand families. MLD observes that the most successful luxury kitchens specify appliances within the same brand family or collection. Matching handle profiles, finishes and control styles gives a kitchen a visual coherence that a mixed set rarely achieves. Names that come up repeatedly in designer sourcing discussions include Bosch, Miele, Fisher Paykel, Wolf, Thermador, Monogram and Viking, and each family has its own range logic. Group your schedule by brand family and gaps show up at once: if the oven and hob share a collection but the dishwasher doesn't, you can decide whether the mismatch matters.

Trade pricing. Supplier pages aimed at trade buyers make much of trade accounts. One procurement guide claims that trade accounts can unlock wholesale pricing 20–50% below retail. That's a vendor's own claim, not a market benchmark, so treat it as a reason to ask your suppliers what trade terms they offer, not as a number to promise a client. Note any agreed trade price against the retail price in your internal estimate.

This is where margin handling matters. ArchiBoard's role-based permissions let you keep supplier cost and markup visible to the team while the client sees only the figures meant for them. Multi-currency support helps when suppliers quote in different currencies: each line can be held in its original currency and still roll up into one estimate.

Track Order Deadlines Against Installation Dates

Most guides stop at "spec, measure, order." The harder part comes after the order is placed. An appliance schedule is a set of lead times that all have to land inside the construction programme: the oven that arrives before the worktop is templated, the fridge that turns up after the kitchen is sealed, the dishwasher that's ready but has no plumbing rough-in waiting for it.

Work backwards from the installation date for each item. Fix the date the appliance must be on site, subtract the supplier's stated lead time and transit, and you have the latest sensible order date. Do this per appliance, not for the project as a whole, because lead times vary widely between standard and made-to-order units. Add a buffer for delivery logistics, and build in one deliberate check: the final cutout confirmation from the cabinet maker has to come before the order date, not after it. If you want a parallel on the money side, our guide to tracking client and supplier payments on an interior project covers keeping deposits and balances visible in the same way.

ArchiBoard's timeline tools put order deadlines and delivery dates on one view next to the rest of the project tasks, so a slipping delivery shows up against the installation it threatens. Assign each order or chase to a team member as a task with a due date. When a supplier confirms a revised delivery, update the date once and the knock-on effect on the installation sequence is visible straight away, rather than discovered when the fitter arrives.

Build Room Budgets and a Client-Ready Approval View

Appliances are among the largest single-item costs in a kitchen, so they deserve to be budgeted at room level, not buried in a general total. A per-room estimate shows exactly what the kitchen, utility room or pantry costs, with appliances, ventilation, plumbing and electrical supply gathered together. Because each line carries its photo, SKU and price from the clipped supplier page, the estimate doubles as a visual specification.

MLD argues that letting clients interact with the actual appliances speeds approval, and the same principle applies to the paperwork. Clients approve faster when they can see a real product image, a clear price and a room total, and slower when they receive a spreadsheet of codes. Export the room estimate as a PDF with the client-facing view, which leaves out margins and supplier cost, and you can present a clean approval document without exposing how the price was built. Internally, the team keeps the full picture: cost, markup and trade terms.

A sensible approval sequence runs like this: share the room estimate, record the client's sign-off against the specific appliance list, then release the orders against the dates you worked out in the previous step. Approval and ordering stay linked, so nothing gets purchased on a verbal yes that later turns into a dispute.

If you're managing appliance sourcing for interior projects across several rooms or clients, the combination of locked dimensions, grouped dependencies, tracked dates and a controlled client view is what turns a stressful purchasing phase into a routine one. You can set all of this up in a free Starter workspace by registering with ArchiBoard and clipping your first appliance from a supplier page.

Read next