How to Calculate Tiles with Waste for Floors and Walls

· 8 min read

To calculate tiles with waste, measure the net area you need to cover, add a waste percentage that matches the tile format and layout, and convert the result into whole boxes. Round up only once, at the end, and plan one spare box from the same batch for future repairs. The method below works for floors and walls and gives a number you can put straight into an estimate.

The basic formula in six steps

Every tile calculation follows the same sequence. Most mistakes come from skipping a step or rounding too early.

  1. Measure the net area of each surface separately: floor, each tiled wall, niches, and so on.
  2. Subtract openings that will not be tiled: doors, windows, built-in cabinets, and a bath panel if the tile stops there.
  3. Choose a waste percentage based on layout, tile size and room shape (see the table in the next section).
  4. Calculate the area with waste: net area × (1 + waste ÷ 100).
  5. Convert to boxes: area with waste ÷ area per box. Round up to a whole box.
  6. Check the real waste: (boxes × area per box − net area) ÷ net area. If it is far from your assumption, the box size is driving the result, not the layout.

Worked example

Example bathroom, 2.4 m × 3.0 m, tiles laid in a straight grid. Walls are tiled to 2.1 m, with one door (0.9 × 2.1 m) and one window (1.0 × 1.2 m). Prices are illustrative only.

StepFloorWalls
Net area2.4 × 3.0 = 7.20 m²10.8 m perimeter × 2.1 m = 22.68 m², minus 1.89 and 1.20 = 19.59 m²
Waste assumption10%10%
Area with waste7.92 m²21.55 m²
Area per box1.44 m² (4 tiles)1.08 m² (6 tiles)
Boxes, exact5.5019.95
Boxes to order620
Area purchased8.64 m²21.60 m²
Real waste20%about 10.3%
Example price per m²EUR 30EUR 24
Material costEUR 259.20EUR 518.40

Notice the floor: you planned 10%, but the box size gives you 20%. That is not an error. It is the effect of selling tiles in whole boxes, and it means the floor already has a built-in spare.

Choosing the waste percentage

Waste comes from cuts at the edges, breakage, tiles rejected for defects, and pattern matching. The values below are working starting points, not standards. Confirm them with the installer who will actually lay the tile, and raise them if the room has many corners, niches or pipes.

SituationStarting wasteWhy
Straight grid, simple rectangular room, small or medium tile5–10%Cuts only along the walls; offcuts are often reused on the opposite side.
Offset (brick) layout10%Half-tiles at each row end; offcuts usually can be reused.
Large format (long side about 60 cm or more)10–15%Fewer tiles, but each cut or chipped tile costs more area.
Diagonal layout10–15%Every edge tile is cut at an angle, so offcuts are rarely reusable.
Herringbone, chevron, patterns that must align15–20%Tiles are cut to a pattern and veining or decor must match.
Small rooms with many niches, pipes and cornersAdd 3–5 points to the value aboveThe share of cut tiles grows as the room gets smaller and more complex.

Do not add waste twice

If your supplier or installer already quotes an area with a reserve included, do not add another percentage on top. Ask which number you are looking at: net area or area with waste.

Measuring floors and walls correctly

Floors

Split an irregular room into rectangles, calculate each one and add them up. Tiles continue into door openings and through thresholds, so add the opening width times the wall thickness. Do not subtract fixed furniture that will stand on top of the tile, such as a freestanding bath or a wardrobe, unless the installer confirms that the tile will stop short of it.

Walls

Calculate each wall as width × tiled height, then subtract openings. Deduct windows and doors only when they are larger than a small amount of area, since tiny deductions are smaller than your waste margin. Add back anything that increases the tiled area: window reveals, niches, the sides of a box around pipes, and a bath screen return.

Measuring checklist

  • Measure each wall at two heights; old walls are rarely square.
  • Write down the tiled height for every wall, since it is often different around a bath or a basin.
  • Record openings with their sizes, not only their areas.
  • Include niches, reveals and steps as separate lines.
  • Mark which surfaces use a different tile or a border so each gets its own calculation.
  • Check that the sum of room areas matches the total area in the project documents.

Rounding, batches and spare tiles

Tiles are sold in boxes, so the final quantity is always a whole number of boxes. Three rules keep the order clean.

  1. Round up after adding waste, never before. Rounding the net area first and then adding a percentage compounds the error.
  2. Calculate per room, round per purchase. If the same tile goes into several rooms and you buy it in one order, sum the areas with waste first and round once. You avoid buying an extra box per room.
  3. Order everything from one batch. The same product can differ in shade or calibre between production batches. Ask the supplier to confirm batch numbers on the boxes before shipment, and check them on delivery.

The spare box

Keep at least one sealed box of the same batch for future repairs, because the same tile may be discontinued or differ in shade in a few years. When your real waste after rounding is already high, as on the floor in the example, the offcuts and leftover tiles can serve as the spare. Agree this with the client in advance and store the spare tiles on site.

Before you place the order

  • Net area is calculated per surface, with openings subtracted.
  • The waste percentage matches the layout and has been confirmed with the installer.
  • The area per box is taken from the supplier's data, not assumed from tile size.
  • The box count is rounded up once, after waste.
  • The real waste after rounding is calculated and sensible.
  • Adhesive, grout and trims are calculated from the net area, not from the area purchased.
  • The supplier confirms stock in one batch, and the delivery date fits the installation schedule.

How to do it in ArchiBoard

The steps below keep the calculation inside the estimate, so the box count, price and delivery data stay together. You can also try the material calculator to get the first numbers.

  1. Open the project, go to "Rooms" and click "Add room" for each space. If the sum of room areas does not match the project area, a warning appears, so fix it before you calculate materials.
  2. Go to "Estimates" and click "Add item" in the room. Paste the product link and click "Auto-fill" to pull in the name, photo, price, dimensions, packaging and unit of measurement. Check the fields and click "Save item".
  3. In the item card, enter the net quantity (for example, in m²) and the reserve in percent. Then fill in "m² per package" or "Pieces per package".
  4. If you need a starting point, use the floor and wall area calculator, which can suggest values based on the room area.
  5. Check the "Qty" column. It shows how much to purchase in whole packages. Under the price you see whether it is "per pack" or "per piece", and below that the price per m².
  6. If the same tile goes into several rooms, click "Add item" above the estimate and turn on "In several rooms". Tick the rooms and choose "Evenly", "By quantity" or "By percent". It stays one item with one purchase and one payment. You can adjust exact quantities later with "Split across rooms" in the item row.

For more detail on rows, statuses and totals, see the estimates chapter of the help center.

FAQ

How much waste should I add when I calculate tiles?

For a straight grid in a simple room, 5–10% is a common starting point. Use 10–15% for large formats and diagonal layouts, and 15–20% for herringbone or patterns that must align. Treat these as working assumptions and confirm them with the installer, who knows how many cuts the room will need.

Should I add waste to each room or to the whole project?

Calculate the net area per room, because the cuts happen room by room. Then sum the areas with waste for each tile type and round up to whole boxes once for the whole purchase. This avoids buying an extra box for every room that uses the same tile.

Do I round up before or after adding waste?

Always after. First get the net area, then add the waste percentage, then divide by the area per box and round up to a whole box. If you round the net area first, the rounding error is multiplied by the waste percentage and the result drifts.

Do I need extra tiles for future repairs?

Yes, keep at least one sealed box from the same batch. Shade and calibre can differ between batches, and a product may be discontinued. If whole-box rounding already leaves you a large reserve, as often happens on small floors, that surplus can serve as the spare. Store it and tell the client where it is.

Does tile size change how much waste I need?

Yes. Large tiles mean fewer pieces, but each cut or damaged tile removes more area, so the percentage is usually higher. Small tiles and mosaics produce more joints but offcuts are easier to reuse. The room shape matters as much as the size: many corners and niches raise the waste for any format.

Read next