How Much Paint for a Room: Calculation With Examples
· 9 min read
A reliable how much paint for a room calculation takes five numbers: paintable area, number of coats, coverage per litre from the tin, a reserve, and the can size you will round up to. Multiply area by coats, divide by coverage, add the reserve, then round up to whole cans. Below is the full method with two worked examples, one metric and one imperial.
Measure the room the way a painter reads it
Most paint errors come from the measurements, not the formula. Take them once, write them down per room, and keep walls and ceiling separate, because they often use different paint and different coverage.
Steps for measuring
- Measure the length and width of the room. Add the four walls together to get the perimeter: 2 × (length + width).
- Measure the finished ceiling height, from floor to ceiling, at two or three points. Use the highest value if they differ.
- Multiply perimeter by height to get the gross wall area.
- Measure each door and window opening (width × height) and add them up.
- Subtract the openings from the gross wall area. The result is the net wall area.
- Multiply length by width to get the ceiling area.
What to deduct and what to keep
Deduct large openings: doors, windows, wide archways, built-in wardrobes that will not be painted. Do not deduct small items such as sockets, switches or a narrow niche. The saved paint is negligible and the reserve covers it. Keep a deep reveal or window return in the area if you are painting it, because that surface counts.
Checklist before you calculate
- Ceiling height is measured, not taken from the drawing.
- Every door and window is listed with its size.
- You know which surfaces get paint: walls only, walls and ceiling, or also trim, doors and radiators.
- Wall condition is noted: new plaster, previously painted, wallpaper removed, patched.
- The colour change is noted: light over light, or dark over light and the other way round.
- You have the coverage figure from the tin or the technical data sheet of the exact product.
The formula
Coverage is the area one litre covers with one coat. It is printed on the tin and depends on the product and the surface. Never use a generic figure when you have the real one. The same logic works in gallons and square feet.
- Paintable area = net wall area (or ceiling area).
- Area to cover = paintable area × number of coats.
- Paint needed = area to cover ÷ coverage per litre.
- Paint with reserve = paint needed × (1 + reserve %).
- Cans to buy = paint with reserve ÷ can volume, rounded up to a whole can.
For the units: 1 m² is about 10.76 ft², and 1 US gallon is about 3.785 litres.
Worked example in metric units
A bedroom is 4.0 × 3.5 m with a ceiling height of 2.7 m, one door of 0.9 × 2.1 m and one window of 1.4 × 1.5 m. The walls and the ceiling get two coats each. The coverage values are assumptions for this example: 10 m² per litre for the wall paint and 8 m² per litre for the ceiling paint. Use the values from your own tins.
| Step | Walls | Ceiling |
|---|---|---|
| Gross area | 2 × (4.0 + 3.5) × 2.7 = 40.5 m² | 4.0 × 3.5 = 14.0 m² |
| Openings | 1.89 + 2.10 = 3.99 m² | none |
| Net area | 36.5 m² | 14.0 m² |
| Two coats | 73.0 m² | 28.0 m² |
| Coverage (example) | 10 m² per litre | 8 m² per litre |
| Paint needed | 7.3 L | 3.5 L |
| With 10% reserve | 8.0 L | 3.9 L |
| Round to cans | 4 cans of 2.5 L (10 L), or 5 L + 2.5 L + 1 L (8.5 L) | one 4 L can, or 2.5 L + 1.5 L if sold that way |
Rounding is a purchasing decision. Compare the price of one large can against several small ones, and think about touch-ups: leftover paint from the same batch is useful for repairs after the move-in.
Worked example in imperial units
A living room is 14 × 12 ft with a 9 ft ceiling, one door of 3 × 7 ft and two windows of 3 × 5 ft. Two coats. Assumed coverage for this example: 350 ft² per US gallon.
- Perimeter: 2 × (14 + 12) = 52 ft. Gross wall area: 52 × 9 = 468 ft².
- Openings: 21 + 15 + 15 = 51 ft². Net wall area: 417 ft².
- Two coats: 417 × 2 = 834 ft².
- Paint needed: 834 ÷ 350 ≈ 2.38 gallons.
- With a 10% reserve: about 2.62 gallons. Buy 3 gallons, or 2 gallons plus 3 quarts if the product is sold in quarts.
Adjust the result for the real surface
The printed coverage is measured on a smooth, sealed surface. Real walls differ, so decide the reserve per surface rather than using one number for the whole project. The values below are working examples. Confirm them with the paint supplier or the product data sheet.
| Situation | Effect on paint | Example reserve |
|---|---|---|
| Smooth, previously painted wall, similar colour | Close to the printed coverage | 5–10% |
| Fresh plaster or filler, not primed | Surface absorbs more; prime first and count primer separately | 10–15% on the finish paint |
| Textured or rough wall | More surface than the flat area suggests | 15–20% |
| Dark colour over light, or a strong colour change | A third coat or a tinted primer may be needed | Recalculate with 3 coats |
| Deep-tinted or saturated colour | Lower hiding power, more coats | Ask the supplier for coats needed |
| Many cut-in edges, small room with lots of corners | More waste on tape, brush and roller loading | 10–15% |
Items that need a separate line
- Primer or sealer: its own coverage and its own can. Calculate it with the same formula, usually with one coat.
- Trim, baseboards, door frames: a different product and sheen, normally in small cans. Estimate by length and width of the profile, or add a small fixed quantity per room.
- Doors, radiators, built-in furniture: count each as its own surface if they are painted on site.
- Accent walls: calculate the wall as its own line, because it has its own colour and often more coats.
Buying rules that prevent colour mismatch
- Order the full quantity for one room at once, not in two rounds.
- Check that all cans of one colour carry the same batch number. If they do not, mix them in one container before painting.
- Keep one small can for repairs. Store it closed, with the colour name and room written on it.
How to do it in ArchiBoard
Paint is easy to miscount when you keep it in a note or a spreadsheet and the cans have to be rounded by hand. In the estimate the packaging and reserve fields do the rounding for you. The steps below treat the coverage of a can as its area in m². The area is entered as net area multiplied by the number of coats.
- If you need a starting figure, open the material calculator and use it to get the wall area from the room dimensions. Then deduct the openings yourself.
- Open the project and go to Estimates. Click "Add item" in the room you are working on. The button is there even in an empty room.
- Paste the link to the paint from the store and click "Auto-fill". Check the name, price, brand and SKU, then click "Save item".
- Open the item card. As the net quantity enter the area to cover in m², for example 73 (36.5 m² × 2 coats).
- Enter the reserve in percent, for example 10.
- Fill in "m² per package": the can volume multiplied by the coverage per litre. A 2.5 L can at 10 m² per litre is 25 m².
- Read the "Qty" column. It shows how much to purchase in whole packages: in this example 4 cans. Under the price you will see what it refers to, "per pack" or "per piece".
- Do the same for the ceiling paint, primer and trim as separate items, then use "Group by" → "By room" to see the totals per room.
If the same paint goes to several rooms, click "Add item" above the estimate and turn on "In several rooms". Tick the rooms and split the quantity "Evenly", "By quantity" or "By percent". It stays one item: one purchase and one payment. Details on quantities and packaging are in the estimates chapter of the help.
FAQ
Do I have to subtract windows and doors from the wall area?
Yes, for large openings. Subtracting doors and windows can save a full can in a big room. Do not subtract sockets, switches or small niches. Keep a reserve of about 10% so that corners, repairs and cutting in are covered, and keep deep window reveals in the area if you paint them.
How many coats of paint should I count?
Two coats is the usual assumption for walls and ceilings over a prepared, primed surface. Use three if you change from a dark to a light colour or paint a deeply tinted colour. The tin or the data sheet of the exact product states the recommended number of coats. Use that figure.
Is the ceiling calculated together with the walls?
Calculate it separately. Ceilings usually use a different paint, often matt, with its own coverage and a different colour. Take the ceiling area as length × width, multiply by the coats, divide by the coverage of the ceiling paint, and add the reserve. Buy it as a separate line in the estimate.
How do I convert the result to gallons or square feet?
Convert the coverage figure first, then calculate in one system. One square metre is about 10.76 square feet, and one US gallon is about 3.785 litres. Many tins print both units. If they do, use the unit you measured the room in and avoid converting the final result.
How much extra paint should I buy for touch-ups?
A reserve of 5–10% on a smooth, painted surface is a common starting point. Raise it to 15–20% for textured walls. Keep any unopened cans of the same batch for future repairs. Do not tint a second batch later and expect it to match exactly, because small colour differences between batches are normal.
Should primer be included in the paint calculation?
Calculate primer as its own material. It has its own coverage, usually one coat, and its own can size. On fresh plaster or filler it also reduces how much finish paint the wall absorbs. Add it as a separate line and apply the same formula with the primer coverage from its tin.